OrionMotorTech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press

Description

OrionMotorTech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit
ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation. Easily replaces wheel bearings while keeping the steering knuckle and strut assembled on the vehicle.
INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.
PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.
This 23-piece front wheel bearing tool kit is used to remove and install the wheel bearings on front-wheel-drive vehicles while keeping the steering knuckle and strut assembled on the vehicle - saving you time and money.
Material
: Carbon steel tools with ABS plastic case
Dimensions
: 17.7” x 12.2” x 4.1”
Item Weight
: 24 lb
Complete Kit For Front Wheel Drive Vehicles
This 23 piece set comes with all the tools you need to make removal and installation a breeze. Near universal compatibility with most American, European and Japanese front wheel vans, cars, or light trucks.
Anti-Rust Premium Grade Materials
Constructed from heavy-duty forged steel with a black-oxide finish on the adapters for maximum strength and longevity that resists rust and corrosion.
Orion Motor Tech SUPPORT & QUALITY
We value each customer and stand behind every tool we make. If you have any issues with your order, please let us know.
How
to Replace Wheel Bearings:
Step.1
Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2
Assemble the tool components, and press out the worn bearing.
Step.3
Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4
Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5
Assemble tool components. Lightly oil the hub assembly, and install the hub.
Attention​:
The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6
Assemble the remaining vehicle components that were removed for bearing replacement:
(1)
lower ball joint to steering knuckle assembly brake rotor.
(2)
disc brake caliper.
(3)
outer tie rod nut and tie rod.
(4)
axle nut.
(5)
front tires.
Package Content:
Part Number -- Part Size
Sleeve [A-D]:
A
- 4.03"(102.25mm) O.D. x 2.55"(64.65mm) Length
B
- 3.61"(91.68mm) O.D. x 2.55"(64.65mm) Length
C
- 3.41"(86.66mm) O.D. x 2.55"(64.65mm) Length
D
- 3.00"(76.23mm) O.D. x 2.55"(64.65mm) Length
Sleeve Plate [E-F]:
E
- 4.03"(102.38mm) O.D. x 0.71"(18.03mm) Thickness
F
- 3.39"(86mm) O.D. x 0.71"(18.03mm) Thickness
Bushing [G-R]:
G
- 3.48"(88.34mm) O.D. x 0.55"(14.01mm) Thickness
H
- 3.28"(83.25mm) O.D. x 0.55"(14.01mm) Thickness
I
- 3.21"(81.46mm) O.D. x 0.55"(14.01mm) Thickness
J
- 3.05"(77.55mm) O.D. x 0.55"(14.01mm) Thickness
K
- 2.95"(75.00mm) O.D. x 0.55"(14.01mm) Thickness
L
- 2.89"(73.46mm) O.D. x 0.55"(14.01mm) Thickness
M
- 2.81"(71.41mm) O.D. x 0.55"(14.01mm) Thickness
N
- 2.75"(69.75mm) O.D. x 0.55"(14.01mm) Thickness
O
- 2.62"(66.49mm) O.D. x 0.55"(14.01mm) Thickness
P
- 2.48"(62.95mm) O.D. x 0.55"(14.01mm) Thickness
Q
- 2.32"(58.93mm) O.D. x 0.55"(14.01mm) Thickness
R
- 2.16"(54.92mm) O.D. x 0.55"(14.01mm) Thickness
Washer [S]:
S
- 1.52"(38.6mm) O.D. & 0.91"(23mm) I.D.
Sliding Forcing Screw [T]:
T
- 1.26"(31.95mm) Hex x 8.27"(210mm) Length
Sliding Forcing Nut [U]:
U
- 1.25"(31.81mm) Hex x 2.36"(60mm) & 0.78"(19.75mm) I.D.
Wheel Hub Installer [V]:
V
- 2.87"(72.93mm) O.D. x 0.79"(20.02mm) Thickness