Athena Power AP-TSALB01 24pin LED Dispaly Power Supply/SystemTester

Description

The AP-TSALB01 is a light weight power supply tester. Offering more than 7 different ports to test all sets of connectors your power supply may have there is a front LED display that lights up once a connection is connected into the tester. The1.67” x 0.71” inch LED display also displays the amperage for each respective rail. This easy to read and use tester is ideal for advanced users to detect if their PSU is running correctly and if the correct amperage is used. There is also an alarm that beeps when the 12V connector is not connected, once connected it will display all pertaining data onto the LED screen. This power supply tester is for any users who wish to check on the status of their PSU’s amperage.
The Methods of Operation
Turn on your power supply
Plug-in your 24 pin power supply connector to mini tester
Check if the LED light does turn ON (+5V, +12V, +3.3V, -5V, -12V, +5VSB, PG needs to be shown with coresbonding numbers)
Plug-in HDD connector, check +12V, +5V
Remove HDD connector, plug-in P4/P6/P8 connector, check +12V
Remove P4/P6/P8 connector, Plug Floppy connector. Check +12V, +5V
Remove Floppy connector, plug-in SATA connector, check +12V, +5V, +3.3V
Voltage Source
20/24 pin (ATX-connector)
Voltage Test
+12V1, +5V, +3.3V, 5V-SB, +12V2, -12V
Connectors
ATX 20/24 pin, EPS-12V 8pin, P4-12V 4pin, PCIE 6pin, SATA 15pin, Molex 4pin, Floppy 4pin
Material
Aluminum (body), Plastic (connector base)
Alarm
P.G Value, Voltage Detect
LCD Display
1.67” x 0.77” (L x W)
Dimension
4.91” x 2.52” x 0.71” (L x W x H)